Blindstitch
wrong side of
fabric
right side of fabric
Securing Stitch
Blindstitch foot/sole No. 5
Blind hem
For invisible hems in medium to heavy cotton, wool and blended fabrics.
Preparation
finish raw edges
█
fold the hem and baste or pin in place
█
fold the fabric back over the right side of the fabric to expose the finished
█
lower edge (see drawing)
place the work under the presser foot with the guide positioned against the
█
folded-back fabric
Sewing
the needle should just pierce the edge of the fold (as when hand blind-
█
stitching)
adjust the stitch width to suit the fabric thickness
█
after sewing about 4" (10cm), check both sides of fabric and adjust width
█
again if necessary
the metal guide on the sole of the blindstitch sole can be adjusted sideways
█
by turning the screw on the right
wrong side of
fabric
Reverse pattern foot/sole No. 1
Securing program
for all fabrics
█
secures beginning and end of seam
█
Sewing long seams
quicker securing at beginning and end of seam
█
even securing by defined stitch count
█
Sew begin
the sewing computer secures seam automatically (5 stitches forward,
█
5 stitches reverse)
then it continues with straight-stitch forward
█
Ending the seam
press the Quick reverse button on head frame; the sewing computer
█
secures automatically (5 stitches reverse, 5 stitches forward)
the sewing computer stops automatically when securing is complete
█
033301.70.04_1007_B330_B350_B380_EN
Sewing stitches - Examples of application
Fine stitch-width adjustment
Guide the folded edge evenly along the metal guide on the foot =
even depth.
35