Dell DR4000 Owner's Manual page 125

• Hard drives
• SAS backplane
• USB memory keys
• NIC hardware key
• Expansion-card riser
• Integrated storage controller card
• iDRAC6 Express card
• iDRAC6 Enterprise card
• Power supplies
• Fans
• Processors and heat sinks
• Memory modules
4 Let the system dry thoroughly for at least 24 hours.
5 Reinstall the components you removed in step 3.
6 Close the system. See "Closing the System" on page 61.
7 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the system does not start properly, see "Getting Help" on page 149.
8 If the system starts properly, shut down the system and reinstall all of the
expansion cards that you removed. See "Installing an Expansion Card" on
page 84.
9 Run the appropriate Embedded System diagnostic test. See "Running the
Embedded System Diagnostics" on page 140.
If the tests fail, see "Getting Help" on page 149.
Troubleshooting Your System
125