Bernina 1300MDC User Manual page 72

72 Buttonholes - Applications
Sewing Hand-look Buttonhole No. 63
Length of the First Bead
• sew bead to desired length
• stop sewing computer
Programming the Buttonhole
• press Quick Reverse button on head frame,
continue sewing
• «auto» and the programmed length (in
mm) appears on the screen to indicate that
the buttonhole length is programmed
Auto Buttonhole
the sewing computer sews the following
automatically:
• the eye
• the second bead in reverse
• the bartack, the securing stitches and stops
automatically
All subsequent buttonholes will be sewn
automatically to the same length (without
pressing the Quick Reverse button)
Important: How to Correct Mistakes
• touch the Pattern Begin function
• the sewing computer reverts to the
beginning of the buttonhole
Deleting Saved Buttonholes
• press the «clr» button or touch «recording»
• «auto» disappears and «recording» appears
• a new buttonhole length can be
programmed
031196.50.04_0507_a630_EN
Beautiful buttonholes
• for successful sewing of
buttonholes always use a
suitable stabilizer or
interfacing
• using a cord enhances the
appearance of the buttonholes
• keep the speed consistent for
each buttonhole (reduce
motor speed if necessary). This
results in equal density of the
buttonhole bead