Stitch Selection - Bernina 1300MDC User Manual

Stitch Selection

Stitches can be selected using one of the two
methods listed below.
Saving Changes
• a special screen opens
• touch «Save Settings» = all changes are
saved
• touch «Reset Settings» to return to basic
settings
• touch «ESC» and the screen closes without
anything being saved or altered
Direct Selection by Scrolling up/down
Within a Stitch Category
• touch the arrow (down)
• the top row disappears
• the next two rows move up
• a new row appears at the bottom
Stitch Selection by Number
• touch the function «0–9»
• the screen changes to a numeric pad
• touch numbers to select the stitch of your
choice
• the number of the selected stitch appears
in the upper screen
Confirm Number and Go to Next Screen
• touch «OK» to confirm
• the selected stitch is displayed in the Stitch
Altering Area
• touch «ESC»
• the screen displays the selected stitch
• the selected stitch is active (highlighted in
blue)
031196.50.04_0507_a630_EN
Displays on Screen
• touch the arrow (up)
• the first row of stitches appears again
• the Scroll function (up/down) is used to
find and view all the sewing computer's
stitches
Correcting Mistakes
• to correct mistakes or deselect, touch
function top right (arrow)
• the number is deleted from right to left
• touch the broad field above the numeric
pad
• the entire number is deleted
• enter new number
If an unavailable number is
entered, it will be indicated with
three question marks in the field
above the numeric pad.
Back to Previous Screen
• do not confirm the entered stitch number
with «OK»
• touch «ESC» or «0-9»
• the previous screen appears
• the stitch selected by number will be
ignored
25