Bernina 1300MDC User Manual page 112

112 Attaching the Embroidery Module
Attaching the Module to the Sewing Computer
Attaching the Module to the Sewing
Computer
• place the module on the sewing computer
behind the free arm
• push the module from the left towards the
sewing computer so that the connecting
lugs engage in the base plate
Connecting the Cable
• plug with flat side to the front
• insert the plug into the socket on the right
hand side of the sewing computer
Releasing the Cable
• pull out the plug
Storing the Cable on the Module
• insert the cable into both cable holders
• press cable gently to secure
Releasing the Cable
• the cable connects the module to the
sewing computer
• pull the cable out of the holder on the
back of the module
Removing the Module
• grip the back right corner to lift the
module and remove to the left
031196.50.04_0507_a630_EN
Caution!
When connecting the
embroidery module, attention
must be paid that all items are
on a flat and even surface!
Caution!
Always separate the module
and sewing computer for
transportation. Never
transport them attached.