Table of Contents
Advertisement
4.4.5
Peripheral Devices Configuration
This menu shows the peripheral devices configuration settings. Select an item then
press <Enter> to display the configuration options.
Advanced
COM1 port:
Base I/O address:
Interrupt:
COM2 port:
Mode:
Base I/O address:
Interrupt:
Parallel port:
Base I/O address:
Mode:
DMA channel:
Interrupt:
Floppy disk controller:
F1
Help
ESC
Exit
COM1 port: [Enabled]
Allows you to configure COM1 port.
Configuration options: [Disabled] [Enabled] [Auto]
Base I/O address: [3F8]
Allows you to select the base I/O address for COM1 port.
Configuration options: [3F8] [2F8] [3E8] [2E8]
Interrupt: [IRQ 4]
Allows you to set the interrupt for COM1 port.
Configuration options: [IRQ 3] [IRQ 4]
COM2 port: [Enabled]
Allows you to configure COM2 port.
Configuration options: [Disabled] [Enabled] [Auto]
Mode: [Normal]
Allows you to set the mode for COM2 port.
Configuration options: [Normal] [IR] [ASK-IR]
Base I/O address: [2F8]
Allows you to select the base I/O address for COM2 port.
Configuration options: [3F8] [2F8] [3E8] [2E8]
4-24
PhoenixBIOS Setup Utility
Peripheral Devices Configuration
Select Item
↑↓
Select Menu
→←
[Enabled]
[3F8]
[IRQ 4]
[Enabled]
[Normal]
[2F8]
[IRQ 3]
[Enabled]
[IRQ 7]
[ECP]
[DMA3]
[ECP]
[Enabled]
-/+
Change Values
Enter
Select
Sub-Menu
Item Specific Help
Confugure COM1 port
using options:
[Disabled]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when
controlled by OS
F9
Setup Defaults
F10
Save and Exit
Chapter 4: BIOS setup
Advertisement
Table of Contents
