Peripheral Devices Configuration - Asus Motherboard DSBV-D User Manual

4.4.5

Peripheral Devices Configuration

This menu shows the peripheral devices configuration settings. Select an item
then press <Enter> to display the configuration options.
Advanced
Peripheral Devices Configuration
COM1 port :
Base I/O address:
Interrupt:
COM2 port:
Mode:
Base I/O address:
Interrupt:
Parallel port:
Base I/O address:
Interrupt:
Mode:
DMA channel
Floppy disk controller
F1 Help
↑↓
ESC Exit
→←
COM1 port [Enabled]
Allows you to configure COM1 port.
Configuration options: [Disabled] [Enabled] [Auto]
Base I/O address [3F8]
Allows you to select the base I/O address for COM1 port.
Configuration options: [3F8] [2F8] [3E8] [2E8]
Interrupt [IRQ 4]
Allows you to set the interrupt for COM1 port.
Configuration options: [IRQ 3] [IRQ 4]
COM2 port [Enabled]
Allows you to configure COM2 port.
Configuration options: [Disabled] [Enabled] [Auto]
Mode [Normal]
Allows you to set the mode for COM2 port.
Configuration options: [Normal] [IR] [ASK-IR]
Base I/O address [2F8]
Allows you to select the base I/O address for COM2 port.
Configuration options: [3F8] [2F8] [3E8] [2E8]
ASUS DSBV-D
PhoenixBIOS Setup Utility
[Enabled]
[3F8]
[IRQ 4]
[Enabled]
[Normal]
[2F8]
[IRQ 3]
[Enabled]
[378]
[IRQ 7]
[ECP]
[DMA 3]
[Enabled]
Select Item -/+
Select Menu Enter
Item Specific Help
Confugure COM1 port
using options:
[Disabled]
No configuration
[Enabled]
User configuration
[Auto]
configuration
(OS Controlled)
Change Values F9
Select Sub-Menu F10
BIOS or OS chooses
Displayed when
controlled by OS
Setup Defaults
Save and Exit
4-29