Cabling The Server's Rear Panel Cables - Compaq ProLiant 1850R Setup And Installation Manual

4-4 Cabling Guidelines
Ref.

Cabling the Server's Rear Panel Cables

You are now ready to connect the power cord and peripheral devices to the
connectors located on the rear panel of the server. Icons on the back of the
server identify the function of each connector. Follow the procedure below for
instructions on connecting the external cables to the server and then securing
those cables to the rack.
1. Plug the cables into the server.
Figure 4-3. Cabling the server rear panel cables
Important Connectors
1 Floppy Connector
2 Port 2 SCSI Connector (2), It connects to the removable media bay for SCSI
hard drives, tape drives, or external SCSI devices via the external connector.
3 IDE Connector
4 Port 1 SCSI Connector, It connects to the Hot-Plug Drive Cage.
Table 4-2
Connector