Getting Started; Step 1. Set-Up And Installation; Camera Connection - Uniden UBW2101 Owner's Manual

Getting Started

Step 1. Connection & Installation

Camera Connection

2
DC IN 5V/1A
# The built-in Lithium-Polymer battery charges automatically when the
power adapter is connected. Charge the battery to full capacity before
using the monitor in portable mode. The battery is at full capacity when
the green battery indicator turns off.
# Only use the 5V/1A power adapter provided in the package.
LCD Monitor Connection
2
# The built-in Lithium-Polymer battery charges automatically when the
power adapter is connected. Charge the battery to full capacity before
using the monitor in portable mode.
# In portable mode, charge the battery when the battery indicator lights
up red.
# Only use the 5V/1A power adapter provided in the package.
1.
2.
1
1.
2.
1
6
Connect the power cable to the
camera's DC IN jack, and then
plug the power adapter to a
standard 120V AC wall outlet.
Slide the power switch down
once to turn ON the camera.
Connect the power cable to the
monitor's DC IN jack and then
plug the power adapter to a
standard 120V AC wall outlet.
Press the power button to turn
ON the monitor.