Related Manuals for Uniden UBW2101
Summary of Contents for Uniden UBW2101
- Page 1 UBW2101 3.5” LCD Portable Wireless Baby Monitoring System If any items are missing or damaged, contact our Customer Care Line immediately. Never use damaged products! Need Help? Get answers 24/7 at our website: www.uniden.com.
-
Page 2: Important Safety Precautions
Important Safety Precautions This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: x This equipment is NOT waterproof. -
Page 3: For Best Results
Clean only with a dry cloth. Failure to follow the instructions in this operating manual will void the warranty. Uniden assumes no liability for damages to property or injury to persons caused by improper handling or failure to comply with these... -
Page 4: Table Of Contents
Contents Important Safety Precautions .............2 What’s in the Box .................4 Parts of the Baby Monitoring System ..........5 Getting Started ..................6 Step 1. Set-up and Installation ............6 Step 2. Basic Operation ..............7 I. Get to Know the Camera ..............7 II. Get to Know the LCD Monitor ............8 Step 3. -
Page 5: Parts Of The Baby Monitoring System
Parts of the Baby Monitoring System Camera PWR. DC IN 5V/1A Lens Power/Lullaby play switch IR (Infrared) LEDs Pairing Key Light Sensor Reset Battery Indicator 10. DC IN Jack Link Indicator 11. Power Adapter Power Indicator 12. Goose Neck Mount Stand LCD Monitor (Receiver) Battery Indicator PTT (Push to Talk)/OK... -
Page 6: Getting Started
Getting Started Step 1. Connection & Installation Camera Connection Connect the power cable to the camera’s DC IN jack, and then plug the power adapter to a standard 120V AC wall outlet. Slide the power switch down once to turn ON the camera. DC IN 5V/1A # The built-in Lithium-Polymer battery charges automatically when the power adapter is connected. -
Page 7: Step 2. Basic Operation
Getting Started (cont’d) Installing the Camera on the Goose Neck Mount Stand Use the goose neck mount stand to install the camera at an appropriate angle in a semi-permanent (desktop mount option) or permanent (wall mount option) location # Ensure the install location is within range of a standard 120 V AC wall outlet. -
Page 8: Get To Know The Lcd Monitor
Step 2: Basic Operation (cont’d) 1) Battery Indicator Green LED: Battery charging; charge battery until green LED turns off. Red LED: Battery low (portable mode); camera will turn off within 3 minutes. Connect the power adapter for charging or continuous use. LED off: Battery fully charged. -
Page 9: Step 3. Advanced Operation
Standard View Mode Menu Mode Quad View Mode View Next Camera (CH1-4) Cursor Up Hot Key CH 1 Volume Down Cursor Left Hot Key CH 2 Lullaby Play Switch Cursor Down Hot Key CH 3 Volume Up Cursor Right Hot Key CH 4 Enter Menu Mode ESC (back) Manual Record... -
Page 10: Get To Know The Main Menu
Advanced Operation (cont’d) II. Get to Know the Main Menu 1. Press MENU in standard view mode to display the main menu (the example shows the menu with the Brightness option highlighted). ◄ ► 2. Use to highlight a ◄ menu option. -
Page 11: Main Menu
Advanced Operation (cont’d) II. Get to Know the Main Menu Camera Setup - Turn Camera(s) On/Off ◄ ► 1. Use to select the camera you want to turn off. 2. Press OK to change ON/OFF status. Make sure available cameras are set to ON for SCAN or Quad mode. -
Page 12: Pairing A Camera/Power Save Mode/Sd Card Format
Advanced Operation (cont’d) II. Get to Know the Main Menu (cont’d) Pairing - Pairing a Camera ◄ ► 1. Use to select a channel. 2. Press OK to start system countdown from 60 seconds. 3. Within the 60 second countdown, press PAIR at the camera side. -
Page 13: Vox Setting - Vox Sensitivity/Enable Vox Recording
Advanced Operation (cont’d) II. Get to Know the Main Menu (cont’d) VOX Setting - VOX Sensitivity (VOX is voice activation) ◄ ► to adjust the VOX sensitivity level. Level 1 - low sensitivity. Level 3 - high sensitivity. At OFF setting, the VOX function is disabled. -
Page 14: Alarm Setup/Event List
Advanced Operation (cont’d) II. Get to Know the Main Menu (cont’d) Alarm Setup - Alarm Setup ◄ ► 1. Use to move between the items. 2. Press OK to shift to ON/OFF. VOX alarm ON: The monitor will give an alarm for 15 seconds when the camera is triggered by voice. -
Page 15: About Digital Wirless Technology
About Digital Wireless Technology This section offers some helpful information to overcome most problems you may encounter. Problem Diagnosis About 2.4GHz Digital Wireless Signal This innovative digital wireless solution integrates advanced Frequency Hopping Spread Spectrum (FHSS) technology. This technology greatly reduces the interference that comes from other devices using the same radio frequency (2.4GHz), e.g. -
Page 16: Troubleshooting Guide
Troubleshooting Guide If you have any trouble with your baby monitor, check this section first. If you need help, visit the customer support page of our website listed on the front cover. Problems Possible Causes Remedies Check power adapter and power No power supply to cable connection, or battery has run camera (Battery low) -
Page 17: Product Specifications
Consult your local waste management authority or a recycling organization like Earth911.com to find an electronics recycling facility in your area. x If you are unable to locate proper recycling facilities in your area, please return this product to Uniden for recycling. -
Page 18: Fcc Compliance Information
FCC Compliance Information Part 15 Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 19: One Year Limited Warranty
(E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner’s manual for this product. - Page 22 © 2012 Uniden America Corporation Printed in China.