Pairing A Camera/Power Save Mode/Sd Card Format - Uniden UBW2101 Owner's Manual

Advanced Operation (cont'd)
II. Get to Know the Main Menu (cont'd)
Pairing - Pairing a Camera
Power Saving - Power Saving
SD Card Format - SD Card Format
◄ ►
1. Use / to select a channel.
2. Press OK to start system
countdown from 60 seconds.
3. Within the 60 second countdown,
press PAIR at the camera side. The
camera signal will display when
pairing is complete.
◄ ►
Use to turn Power Saving
/
mode ON/OFF. If VOX is turned on,
the receiver and camera will come
out of Power Save mode when sound
is detected according to the set
sensitivity level. This means at night,
the monitor LCD will be off, but will
automatically turn on when a noise is
detected.
#
By setting Power Saving mode ON, both
receiver and camera will enter standby
mode after 2-minute idle time, and
speaker volume will be muted. Press
the power key of the receiver to resume
monitoring, and camera key to enter
single channel view.
◄ ►
Use to select No or Yes.
/
#
For first time use, it is strongly
recommended to format the SD card.
12