Using Auto Setup (Intellibeam) - Yamaha YSP1100SL Owner's Manual

Center line
Assembling the supplied cardboard
microphone stand
You will find three separate parts (one circular-shaped part
and two longitudinal-shaped parts) of the cardboard
microphone stand originally put together.
1
3
1
Disassemble the three parts of the cardboard
microphone stand originally put together.
2
Insert one of the longitudinal-shaped part
into the crevice of the other longitudinal-
shaped part.
3
Place the circular-shaped part on top of the
two combined longitudinal-shaped parts.
4
Place the supplied optimizer microphone on
top of the circular-shaped part.
Optimizer
microphone
2
4

Using AUTO SETUP (IntelliBeam)

Once the optimizer microphone is firmly connected to this
unit and properly placed in your listening room, follow the
procedure below to start the AUTO SETUP procedure.
You can also enter the AUTO SETUP procedure simply by
pressing and holding AUTO SETUP on the remote control
more than 2 seconds. In this case, this unit performs both
of the beam optimization and sound optimization
procedures.
+ +
INPUT VOLUME
STANDBY/ON
STB VCR
INPUT1
TV
AUTO
VOL MODE SETUP INPUTMODE
5BEAM ST+3BEAM
1
STEREO MY BEAM
4
MUSIC
7
OFF
0
CH LEVEL
TEST
AUTO SETUP (IntelliBeam)
STANDBY/ON
POWER POWER
AV TV
DVD AUX
TV
INPUT2 MACRO
SLEEP
3BEAM
2 3
SURROUND
5 6
MOVIE SPORTS
8 9
+10
MENU
TV/AV
ENTER
YSP
RETURN
31
En