JVC VN-C215V4U - Fixed Ip Network Mini Dome Instructions Manual page 57

A
Control
B
Destination
Address
C
Destination Port
D
Frame Rate
Note ：
● When the power of VN-C215V4U shuts down
accidentally during multicast transmission,
transmission will restart automatically when
VN-C215V4U is started up again.
For starting or stopping streaming.
Parameters that are set on the Streaming page will be saved when
transmission is started upon pressing the [Start] button.
For specifying the destination address.
Specify the multicast address. When other devices that make use of
multicast transmission exist, ensure that they are set to different multicast
addresses each other.
For specifying the destination port number.
Set to an even number for RTP compliance. Odd numbers cannot be used.
When other devices that make use of multicast transmission exist, it is
recommended that they are set to different port numbers each other.
Multiple multicast streams cannot be received on 1 computer when there are
duplicate port numbers.
Specify the frame rate when performing multicast transmission.
The actual frame rate used for transmission will be the frame rate on the
Encoding page when a value that is larger than the frame rate in the
Encoding page is specified. (A Pg. 44)
57