Alarm Setting - JVC C11U - VN Network Camera Instructions Manual

4-7 Alarm Setting

With [V.Networks Controller], it is possible to set the action to be taken upon
reception of an alarm signal.
1.
Select [Setting] and [Alarm Setting].
2.
Change the set values. (For functional description,
Settings are performed for [Motion Detection Alarm], [Alarm 1], [Alarm 2] and [Relay Alarm].
(With [Relay Alarm] selected, 1 and 2 cannot be set.)
3.
When the settings are complete, click
☞
next page)
1
Text box
2
3
4
.
51