Network - D-Link DCS-942L User Manual

Section 4 - Configuration
This section allows you to configure your network settings.
Automatic IP Select this connection if you have a DHCP server
Address: running on your network and would like a dynamic IP
address to be updated to your camera automatically.
Static IP Address: You may obtain a static or fixed IP address and other
network information from your network administrator
for your camera. A static IP address will ease you for
accessing your camera in the future.
IPv4 Address: The fixed IP address
Subnet Mask: The default value is "255.255.255.0. "
Used to determine if the destination is the same
subnet.
Default Gateway: The gateway used to forward frames
to destinations in a different subnet. Invalid gateway
settings may cause the failure of transmissions to a
different subnet.
Optional Primary DNS: Primary domain name server
that translates names to IP addresses.
Optional Secondary DNS: Secondary domain name
server to backup the Primary DNS.
PPPoE Settings:
If you are using a PPPoE connection, enable it and
enter the User Name and Password for your PPPoE
account. You can get this information from your
Internet service provider (ISP).
D-Link DCS-942L User Manual

Network

28