Network - D-Link DCS-936L User Manual

Section 3 - Configuration
This section allows you to configure your camera's network settings.
Automatic IP
Select this option if you have a DHCP server (i.e., router) running on your
Address: network and would like your camera to obtain an IP address automatically.
Static IP Select this option to manually enter the IP settings on your camera.
Address:
IPv4 Address: Enter an IP address for your camera.
Subnet Mask: Enter the subnet mask for your network. The default value is
255.255.255.0.
Default Gateway: Enter the default gateway address. This is usually the
LAN IP address of your router.
Optional Primary DNS: Enter the IP address for the primary DNS (domain
name server) that translates names to IP addresses. This is usually the LAN
IP address of your router.
Optional Secondary DNS: The secondary DNS acts as a backup to the
primary DNS.
PPPoE
If you are using a PPPoE connection, enable it and enter the User Name
Settings: and Password for your PPPoE account. You can get this information from
your Internet service provider (ISP). Only use this option if the camera is
connected directly to your DSL modem or you have multiple PPPoE public
IP addresses.
IPv6 Settings: Select Automatic IP Address to automatically get an IPv6 address from
your router. If you have a static or fixed IP from your network administrator,
select Static IP address and enter the information provided by your ISP or
network administrator.
D-Link DCS-936L User Manual

Network

27