Honeywell HCCM474M User Manual page 20

MAIN MENU, CONTINUED
AWC (PRESET WHITE BALANCE)
With a white object present in the scene, press SET then position the cursor at White Balance and
set to AWC.
Setting the preset white balance takes several seconds and the selection is complete when the
message "White Balance Completed" displays on the screen. If the selection is not completed in
approximately 5 seconds, press the SET button again.
Note : To avoid failure of the AWC mode setting, do not move
the camera or object until the "white balance completed"
message appears.
MANUAL (Manual white balance)
1. Press SET to set Manual White Balance when the cursor is
positioned at White Balance and the mode is MANUAL.
2. Press the left, right, up, or down direction buttons to control
the Red/Blue gain.
3. After setting, press SET to return to the MAIN MENU.
REV. B 20
MANUAL WHITE BALANCE
Red 00
Blue 00
Press SET to Main Menu
Gain level is from 0 to 20.
HCMU000878
12/29/03