Table of Contents
Advertisement
CONTROLS AND CONNECTIONS, CONTINUED
Camera Back, continued
1. Lens switch
Used to switch between DC and Video lenses.
2. Lens connector
When using an auto-iris lens, connect the lens cable to this connector.
3. Video output connector
BNC connector that outputs a composite video signal.
4. Power indicator
Indicator lights when the camera is powered.
5. Setup buttons
Used when setting up and adjusting the camera with the on-screen menu.
6. Power input terminal
Use only 24Vac or 12Vdc UL listed class 2 power supply.
REV. B
11
HCMU000878
12/29/03
- Quick Links:
- Controls and Connections
- Specifications
Hide quick links:
Advertisement
Table of Contents
