Hunter XC Owners Manual And Programming Instructions
  1. Manuals
  2. Brands
  3. Hunter Manuals
  4. Controller
  5. XC
  6. Owners manual and programming instructions

Hunter XC Owners Manual And Programming Instructions

Residential irrigation controller
Hide thumbs Also See for XC:
Table of Contents

Advertisement

Quick Links

XC
Residential Irrigation Controller
Owner's Manual and
Programming Instructions

Advertisement

Table of Contents
loading

Related Manuals for Hunter XC

Summary of Contents for Hunter XC

  • Page 1 Residential Irrigation Controller Owner’s Manual and Programming Instructions...

  • Page 3: Table Of Contents

    Selecting Specific Days of the Week to Water ......8 Selecting Odd or Even Days to Water ........8 INSTALLATION Selecting Interval Watering ............9 XC Components ................ 1-2 Setting Event Day(s) Off ............9 Mounting the Controller .............. 3 Automatic Watering ............. 9 Connecting Valves and Transformer ..........

  • Page 4: Xc Components

    XC COMPOnEnTs AM PM %24HR EVEN 2,4...30 MO TU WE TH FR SA SU ODD 1,3...29 SENSOR BYPASS SENSOR BYPASS SYSTEM OFF CURRENT TIME/DAY SYSTEM OFF CURRENT TIME/DAY ACTIVE ACTIVE MANUAL-ALL STATIONS START TIMES MANUAL-ALL STATIONS START TIMES MANUAL-ONE STATION...
  • Page 5 A – LCD Display 17. Terminal Strip – Use to attach transformer, sensor, and valve wires from their source to the controller. Run Times – Allows user to set each valve station run time 18. Reset Button – Use to reset the controller. from 1 minute to 4 hours.

  • Page 6: Mounting The Controller

    COnnECTInG VALVEs AnD TRAnsFORMER Installation of the XC should only be done by trained personnel. 1. Route AC power cable and conduit through the ½" (13mm) conduit opening on the left side bottom of the cabinet.

  • Page 7: Replacing The Battery

    The other wire coming from the master valve should be A high-energy lithium battery is included with your Battery attached to the P terminal inside the controller. Tighten each termi- XC controller. The battery allows the user to remotely nal screw. (--) program the controller without connecting AC power.

  • Page 8: Connecting A Weather Sensor

    A Hunter weather sensor or other micro-switch type weather sensors wired into the sensor circuit. You can manually test proper operation can be connected to the XC. The purpose of this sensor is to stop of the rain sensor by running a MANUAL ALL STATIONS cycle or by automatic watering when weather conditions dictate.

  • Page 9: Watering Schedule Form

    WATERInG sCHEDULE HUNTER XC PROGRAM A PROGRAM B PROGRAM C DAY OF THE WEEK MO TU ODD/EVEN OR INTERVAL PROGRAM START TIMES LOCATION STATION RUN TIME STATION RUN TIME STATION RUN TIME STATION NOTES:...

  • Page 10: Programming The Controller

    PROGRAMMInG THE COnTROLLER 5. The time will be displayed. Use the buttons to select AM, PM, or 24 hour. The XC display shows the time and day when the controller is idle. Press the button to move to hours. Hours The display changes when the dial is rotated to indicate the specific will be flashing.

  • Page 11: Eliminating A Program Start Time

    START TIMES Eliminating a Program Start Time Selecting Specific Days of the Week to Water With the dial set to START TIMES position, 1. With the cursor on a specific day push the button until you reach (the cursor will always start with MO), 12:00 AM (Midnight).

  • Page 12: Selecting Interval Watering

    Setting Event Day(s) Off a designated period from 1 to 7 days. At the end of the programmed The XC allows you to program a No Water Day(s). This feature is use- rain off period, the controller will resume normal SYSTEM OFF ful to inhibit watering on specific day(s).

  • Page 13: Seasonal Adjustment

    Seasonal Adjustment Manually Run All Stations MANUAL-ALL STATIONS Seasonal Adjust is used to make global run time changes without 1. Turn dial to MANUAL – ALL STATIONS re-programming the entire controller. To use the seasonal adjustment position. feature: 2. Select program A, B, or C by pressing the button.

  • Page 14: Advanced Features

    Test Program of All Stations ADVAnCED FEATUREs The XC allows the user a simplified method for running a test pro- Programmable Sensor Override gram. This feature will operate each station in numerical sequence, The XC allows the user to program the controller so that the sensor from the lowest to the highest.

  • Page 15: Easy Retrieve™ Program Memory

    Easy Retrieve™ Program Memory Clearing the Controller's Memory/Resetting the Controller The XC is capable of saving the preferred watering program into mem- If you feel you have misprogrammed the controller, there is a process ory for retrieval at a later time. This feature allows for a quick way of that will reset the memory to the factory defaults and erase all pro- resetting the controller to the original programmed watering schedule.

  • Page 16: Troubleshooting Guide

    TROUBLEsHOOTInG GUIDE PROBLEM CAUSES SOLUTIONS The controller is continuously watering. Too many start times have been programmed. Only one start time is necessary to activate a program. (refer to Setting Watering Start Times on page 7). There is no display. Check AC power wiring.

  • Page 17: Specifications

    Seasonal adjustment (10% to 150%). • UL Listed. • Sensor bypass switch. • Model XC-x00 has an IP24 Rating for • XC-x00i for indoor use. XC-x00 for Pollution Degree 4. outdoor use. • Clean only with a cloth dampened with •...

  • Page 18: Ce Notice

    CERTIFICATE OF COnFORMITy TO EUROPEAn DIRECTIVEs Hunter Industries declares that the irrigation controller Model XC complies with the standards of the European Directives of “electromagnetic compatibility” 87/336/EEC and “low voltage” 73/23/EEC. __________________________________ Project Engineer This product should not be used for anything other than what is described in this document. This product should only be serviced by trained and authorized personnel.

Table of Contents