4. In the Device Settings tab, click on Enable the generation of events when paper is inserted into the
scanner to deselect this option.
5. Click on OK to save the changes and close the window. Click on OK to close the Hardware Properties
window.
The AutoLaunch feature is now turned off. Your scanner will not start scanning until you click on one of the
scan buttons on the One Touch button panel, press one of the One Touch buttons on the scanner, or on the
scanning interface from the application you are using.
To turn AutoLaunch back on, follow the instructions in this section and click on the option in step 4 to
re-enable the feature.
Xerox Card Scanner 200 User's Guide
Scanning
19