Changing The Scan Background Color; Switching The Reference Plate - Panasonic KV-S5055C Operating Manual

Changing the Scan Background Color

By switching the reference plates on the scanner, you can change the scanning background color between
black and white. The default setting is black.
Notice
•
Set the reference plate (F) and reference plate (B) to the same color. If the front and rear settings are
different, then documents will not be scanned correctly.

Switching the Reference Plate

1.
Set the power switch (A) of the scanner to "
•
Remove any documents from the hopper.
2.
Pull the ADF door release (A) towards you, and open the ADF door (B).
2
" (OFF).
1
1
Operation
Operating Manual 43