Sherwood ASW-670 Operating Instructions Manual page 48

Continued
Press the CURSOR
and press the SLEEP/TIMER button.
3
• Then is enters the off time setting mode.
Press the CURSOR
and press the SLEEP/TIMER button.
4
• Then it enters the input setting mode.
Note :
• If the on time and the off time are the same, when the SLEEP/TIMER button is pressed, "ERROR" is displayed. In this case,
perform the above steps 3 and 4 to set the time correctly.
Press the CURSOR
5
• Then it enters the volume setting mode.
• Each time CURSOR or buttons is pressed, the input source changes as follows :
Press the CURSOR
6
Press the SLEEP/ TIMER button for more than 2 seconds to memorize.
7
/ buttons to set the hour for on time, press the CURSOR
/ buttons to set the hour for off time, press the CURSOR
/ buttons to select the desired input source and press the SLEEP/TIMER button.
/ buttons to adjust volume level as desired.
48
/ buttons to set the minute
/ buttons to set the minute
DVD
• Then the timer settings are memorized and it returns to
the previous status.
FM AM