Sherwood ASW-670 Operating Instructions Manual page 29

Continued
Rectifying any wrong programmed tracks.
• During programming, press the CURSOR
desired track with pressing the NUMERIC buttons.
Clearing the programmed tracks
[To clear one by one]
• During programming, press the CURSOR
button.
[To clear all programmed tracks]
• During programming, press the PROGRAM button, or press the CURSOR
bottom of the program menu, then press the ENTER button.
/ / / buttons to select the wrong programmed tracks, then select the
• The new track will be programmed in its place.
/ / / buttons to select the tracks to be cleared, then press the CLEAR
• Then the selected track is cleared.
/ / /
• Then the programmed tracks are all cleared.
• Opening the disc tray or selecting an input source,
etc. clears all programmed tracks.
29
buttons to select the "Exit" on the