Sherwood ASW-670 Operating Instructions Manual page 41

Continued
When selecting the Password
Press the CURSOR
1
Press the CURSOR
2
Input 4-digit passwords in sequence for old password, new password and confirmation, then press the ENTER
button.
3
• When each password is input correctly, new password is memorized and the previous menu screen is displayed.
• If you input a wrong password, you cannot change the password to the desired. In this case, input the password again.
Note :
• Do not forget the password.
If you forgot your password, input "3308" that has been set to at factory.
Press the CURSOR
4
Set other setups to your preference.
5
/ buttons to select the Password.
buttons to select the Change, then press the ENTER button.
button to select the item menu.
41