Dual XHD7714 - V3 Installation & Owner's Manual page 8

XHD7714 OPERATION
General Operation
Escape Press ESC to exit any menu adjustment mode.
Press AUD•MENU momentarily to select between Volume
Audio
(default), Bass, Treble, Balance, Fader, Subwoofer and
Source Volume Level.
VOLUME BASS TREBLE BALANCE FADER SUBWOOFER SOURCE LEVEL
Press AUD•MENU until BASS appears, then press SELECT
Bass
to confirm. Rotate volume left/right to adjust (-6 minimum /
+6 maximum).
Treble Press AUD•MENU until TREBLE appears, then press
SELECT to confirm. Rotate volume left/right to adjust ( -6
minimum / +6 maximum).
Note: Any adjustment to the Bass or Treble settings
automatically cancels the current EQ curve (if one is
selected).
Note: Bass and Treble settings are retained for each mode
individually.
Balance Press AUD•MENU until BALANCE appears, then press
SELECT to confirm. Rotate volume left/right to adjust (BAL L
12-BAL 00-BAL R 12). BAL L=R represents equal balance.
Press AUD•MENU until FADER appears, then press SELECT
Fader
to confirm. Rotate volume left/right to adjust (FAD F 12-FAD
00-FAD R 12). FAD L=R represents equal fader.
Press AUD•MENU until SUB-W appears, then press
Subwoofer
SELECT to confirm. Rotate volume left/right to adjust (0-12).
Adjusting levels to 0 turns the subwoofer off.
The source volume level control allows a gain adjustment
Source Volume Level
for each audio source: AM, FM, CD, AUX, USB and Bluetooth.
Set the source volume level for each mode, depending on
the relative volume of each audio source.
To set the source volume level, press AUD•MENU until
SOURCE LEVEL appears. After one second, the current
mode will appear on the display. Turn the volume knob to
adjust the audio level of the current source (-6 minimum/+6
maximum).
Note: Only the current mode will be available for adjustment.
To adjust another mode of operation, press MODE until the
desired mode is selected, then set the source volume level
for that mode.
8