Pin-Outs And Cabling - Martin Audio WAVEFRONT COMPACT - APPLICATIONS GUIDE Application Manual

< >
CONTENTS

2.3 Pin-outs and cabling

W8CT & W8CM
NL8
-1
+1
-2
+2
-3
+3
-4
+4
(See Section 1.3
2.3.1 Cable and panel connector part numbers
Please note the following part numbers when ordering loudspeaker connectors to
make up cables and patch panels.
Neutrik NL connectors
NL8FC
NL8MPR
NL8MM
Connectors should be kept in good, clean, uncorroded condition to ensure full,
undistorted loudspeaker performance. Corroded or damaged pins and sockets can
cause severe distortion or loss of signal.
2.3.2 Recommended loudspeaker cable
Note that a standard 8-core loudspeaker cable will drive through-linked pairs of
W8CTs and W8CMs.
The following table gives suitable copper core specifications for common
applications:
MARTIN AUDIO - APPLICATIONS GUIDE, WAVEFRONT COMPACT SERIES
ENGLISH ONLY
W8CT
Link through
Link through
High Mid -
High Mid +
High 1 -
High 1 +
High 2 -
High 2 +
for connector pin-out drawing)
8 pole cable (female)
8 pole panel (male)
8 pole inline coupler (male-male)
All material © 2007. Martin Audio Ltd. Subject to change without notice.
W8CM
Low Mid -
Low Mid +
Link through
Link through
Link through
Link through
Link through
Link through
GUIDES PRINT