Storing, Transporting, Or Shipping; Preventative Maintenance Schedule - Desa 20 Owner's Manual

OPERATION
Continued
STORING,
TRANSPORTING,
OR SHIPPING
PREVENTATIVE
MAINTENANCE
SCHEDULE
8
Flame-Out
Control
Reset Button
(Fan Guard
Removed)
Figure 8 - Flame-Out Control Reset Button, 44 kW (150,000 Btu/Hr) Model
To Stop Heater
1. Unplug power cord from outlet.
To Restart Heater
1. Wait 2 minutes after stopping heater.
2. Repeat steps under To Start Heater, page 7.
Note: If shipping, transport companies require fuel tanks to be empty.
1. Drain fuel tank.
Note: Some models have drain plug on underside of fuel tank. If so, remove
drain plug to drain all fuel. If heater does not have drain plug, drain fuel
through fuel cap opening. Be sure all fuel is removed.
2. Replace drain plug if provided.
3. If any debris is noted in old fuel, add 1 or 2 quarts of clean kerosene to tank,
stir, and drain again. This will prevent excess debris from clogging filters
during future use.
4. Replace fuel cap or drain plug. Properly dispose of old and dirty fuel. Check
with local automotive service stations that recycle oil.
5. If storing, store heater in dry place. Make sure storage place is free of dust and
corrosive fumes.
IMPORTANT: Do not store kerosene over summer months for use during next
heating season. Using old fuel could damage heater.
Never service heater while it is plugged in, operating, or
hot. Severe burns and electrical shock can occur.
Item How Often
Fuel tank Flush every 150-200 hours
of operation or as needed.
Air output and Replace every 500 hours of
lint filters operation or once a year.
Air intake Wash and dry with soap and
filter water every 500 hours of
operation or as needed.
Fuel filter Clean twice a heating season
or as needed.
WARNING
WARNING ICON G 001
How To
See Storing, Transporting, or
Shipping, above.
See Air Output, Air Intake,
and Lint Filters, page 14.
See Air Output, Air Intake,
and Lint Filters, page 14.
See Fuel Filter, pages 10
and 11.
Continued
099623