Connecting A Dvd Player/Recorder; Digital Audio Pin Cable - Yamaha YSP-600 Owner's Manual

Connections

Connecting a DVD player/recorder

Connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL INPUT jack on
this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on
your DVD/VCR combo player/recorder to the VCR AUDIO INPUT jacks on this unit in addition to the coaxial digital
audio connection.
Notes
• Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system
settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder.
• If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead (see
page 24).
Video signal to the TV
Audio pin cable

Digital audio pin cable

20
En
L
R
VCR TV/STB
AUDIO INPUT
*
For the DVD/VCR combo
player/recorder
connection
R L
Analog
audio
output
DVD player/recorder
Audio
Rear panel of this unit
SUBWOOFER VIDEO TV/STB AUX
OPTICAL COAXIAL
OUT DIGITAL INPUT
DVD SYSTEM
CONNECTOR
Coaxial
digital
output