Other Function; Playing Super Audio Cds With An Ieee1394 Cable - Denon AVR-4806CI Operating Instructions Manual

Advanced Operation

Other function

ZONE3/REC SELECT
FUNCTION DIRECT/STEREO
SURROUND PHONES INPUT MODE
MODE
Playing Super Audio CDs with an IEEE1394
cable
1
Select the input source to which IEEE1394 was
assigned at the "IEEE1394 Assign" (
102) in the system setup.
Example: CD
(Main unit)
• The IEEE1394 indicator lights.
2
Select the surround mode.
Example: DIRECT
(Main unit)
3
Start playback on the selected component.
• The DSD indicator lights.
For operating instructions, refer to the component's
manual.
"DSD DIRECT" is shown on the display when playing
DSD 2-channel signals in the DIRECT mode. "DSD
MULTI DIRECT" is displayed when playing DSD multi-
channel signals in the DIRECT mode (SB CH OUT
"OFF").
page
(Remote control unit)
Lights
(Remote control unit)
Lights
94
CD
When playing DSD signals in the DIRECT or PURE DIRECT
mode, the DSD signals are converted into analog signals.
When playing in other surround modes, the DSD signals are
first converted into PCM signals. The input signal and
playing status can be checked by pressing the ON SCREEN
button on the remote control unit.
Example: When DSD multi-channel signals are played in
the DIRECT mode
Example: When DSD multi-channel signals are played in
the 7CH STEREO mode
INPUT MODE
SURROUND MODE
DIRECT/STEREO
ON SCREEN