Connecting A Microphone - Denon AVR-4806CI Operating Instructions Manual

Easy Setup and Operation
POWER
ON/STANDBY
SYSTEM SETUP

Connecting a microphone

1
Connect the microphone for Auto Setup to the
SETUP MIC
jack on the front panel of the unit.
2
Mount the auto setup microphone onto a
camera tripod, etc., and place it at ear height
at the main listening position in the listening
room with the sound receptor facing the
ceiling.
Microphone
CURSOR
SETUP MIC
ENTER
AMP
SYSTEM SETUP
ENTER
When placing the microphone, adjust the height so
that the microphone's sound receptor is at the height
of the ears of the listener.
Be sure that at the beginning, the measurement is
started with the microphone set up at the main
listening position.
It is not possible to measure properly if there are any
obstacles between the speakers and microphone.
Check that there are no obstacles.
Please do not stand between or near the speakers and
the microphone during the measurements.
NOTE:
• Do not disconnect the microphone until the settings are
completed.
• Do not change the connection of speakers or the
subwoofer's volume after performing these measurements.
20
ON
CURSOR