BREIL 6U50 Instruction Book page 9

2 seconds after releasing buttons
, and . This completes the
reset procedures. A confirmation
beep is heard on completion of the
reset operation.
IMPORTANT
The initial setting must be carried out after each battery replacement in order to ensure
correct operation. If the setting operation is not fully completed, the date, timer and
chronograph functions will not function properly .
• If the initial setting is not completed as shown on page 4, a warning signal is
activated; the date hand begins moving anti-clockwise, indicating that the initial
setting have still to be completed.
2) Press button
and year hands at 12.
3) Press button
at 12 (position 0.0).
4) Press the crown in fully to complete the
initial setting. The day hand (mode hand)
points to Sunday .
• See page 8 for further details of the
functions of each hand on the watch.
and position the month
and position the day hand
5