Table of Contents
Advertisement
Detecting Rogue Systems
Working with sensors
3
Under the General tab change the Sensor-to-Server Communication Port to the
desired port number, then click Save.
Installing sensors
Use any of these tasks to deploy sensors to your network.
Tasks
Installing sensors on specific systems
Using queries and server tasks to install sensors
Using client tasks to install sensors
Installing sensors on specific systems
Use this task to install sensors to specific systems on your network. This task creates a
deployment task that installs the sensor to the selected systems, then performs an immediate
agent wake-up call on them.
This task can be performed from:
Managed Systems for Subnet xxx.xxx.xxx.xxx page.
Systems Details page.
Systems page.
Task
For option definitions, click ? on the page displaying the options.
1
Select the systems where you want to install sensors, then click Rogue Sensor Install.
• In the Systems Details page, you can install the sensor only from the system you are
viewing.
• In the Managed Systems for Subnet xxx.xx.xx.x page, select the systems where
you want to install sensors.
• In the Systems page, select the desired group in the System Tree and select the
systems where you want to install sensors.
NOTE:
If the button is not visible, click More Actions and select Rogue Sensor Install.
2
In the Action pane, click OK.
Using queries and server tasks to install sensors
Use this task to create a query that can run as a server task action to install sensors on managed
systems.
Task
For option definitions, click ? on the page displaying the options.
1
Go to Reporting | Queries, then click New Query in the Queries pane.
McAfee ePolicy Orchestrator 4.0.2 Product Guide
Getting there
Go to Network | Detected Systems and click any
subnet category in the Subnet Status monitor, then
select any subnet and click View Managed Systems.
Go to Systems | System Tree | Systems and click any
system.
Go to Systems | System Tree.
207
Advertisement
Table of Contents
