McAfee EPOLICY ORCHESTRATOR 4.0.2 Product Manual page 159

Sending Notifications
Setting up ePO Notifications
2 Provide the name and address of the SNMP server, then click Save.
The added SNMP Server appears in the SNMP Servers list.
Duplicating SNMP servers
Use this task to duplicate an existing SNMP server.
Task
For option definitions click ? on the page displaying the options.
1 Go to Automation | SNMP Servers, then click Duplicate next to the desired SNMP
server on which you want to base a new entry.
2 Provide a new name, then click Save.
The new SNMP server appears in the SNMP Servers list.
Editing SNMP servers
Use this task to edit existing SNMP server entries.
Task
For option definitions click ? on the page displaying the options.
1 Go to Automation | SNMP Servers, then click Edit next to the desired SNMP server.
2 Edit the Name and Address information as needed, then click Save.
Deleting an SNMP server
Use this task to delete an SNMP server from Notifications.
Task
For option definitions click ? on the page displaying the options.
1 Go to Automation | SNMP Servers, then click Delete next to the desired SNMP server.
2 When prompted, verify that you want to delete the SNMP server.
The SNMP Server is removed from the SNMP Servers list.
Importing .MIB files
Use this task to set up rules to send notification messages to an SNMP server via an SNMP trap.
You must import the NAICOMPLETE.MIB file, located at:
\Program Files\McAfee\ePolicy Orchestrator\MIB
This file allows your network management program to decode the data in the SNMP traps into
meaningful text.
For instructions on importing and implementing .MIB files, see the product documentation for
your network management program.
McAfee ePolicy Orchestrator 4.0.2 Product Guide 159