Setting Up Rogue System Detection; Configuring Rogue System Detection Policy Settings - McAfee EPOLICY ORCHESTRATOR 4.0.2 Product Manual

Detecting Rogue Systems

Setting up Rogue System Detection

Permission set
Rogue System Sensor
Setting up Rogue System Detection
Use these tasks to set up Rogue System Detection.
Protecting your network requires accurate information about the systems that connect to it.
Rogue System Detection uses sensors to monitor the detected systems on your network to
provide this information.
Before you begin
Before you begin setting up Rogue System Detection:
• Make sure you have agents distributed to your systems. For more information, see Distributing
agents .
• Review the information in the preceding sections to understand the sensor and its policies.
Tasks

Configuring Rogue System Detection policy settings

Configuring server settings for Rogue System Detection
Setting up automatic responses to Rogue System Detection events
Configuring Rogue System Detection policy settings
Use this task to configure Rogue System Detection policy settings. Policy settings determine
how the sensor obtains and reports information about system detected on your network.
Task
For option definitions, click ? on the page displaying the options.
1 Go to Systems | Policy Catalog, then from the Product drop-down list select Rogue
System Detection 2.0.0, and from the Category drop-down list select General. All
created policies for Rogue System Detection appear.
2 Edit an existing policy, or create a new policy.
• To edit an existing policy, locate the desired policy and click Edit in its row.
• To create a new policy, click New Policy and, from the Create a policy based on
this existing policy drop-down list, select an existing policy on which to base the new
policy. Name the new policy and click OK.
3 Configure the desired settings and click Save.
198 McAfee ePolicy Orchestrator 4.0.2 Product Guide
Rights
• View Rogue System information.
• No permissions.
• View and change settings.
• View settings.