Kyocera FS C5015N - Color LED Printer Operation Manual page 12

Printing System Settings
8
2-up
4-up
Note
If you select Through in Layout, the value of N-up is fixed at 1
and cannot be changed. Furthermore, if you select Catalog or
Booklet, the value is fixed at 2 and cannot be changed.
Paper Size Specifies the paper size applied to the output. The following
paper sizes are available:
16K, 8K, A3, A4, A5, A6, Auto, B4, B5, B6, C4, Envelope
#10, Envelope #6, Envelope #9, Envelope C5, Envelope
DL, Executive, Folio, Hagaki, ISO B5, Ledger, Legal, Letter,
Monarch, Oficio II, OufukuHagaki, Statement, Youkei 2 and
Youkei 4. The default setting is Auto.
Duplex Sets 2-sided printing. The following modes are available: Off,
Flip on Long Edge and Flip on Short Edge. The default
setting is Off.
Notes
If you select Catalog or Booklet in Layout, the value of
Duplex is fixed at the Flip on Short Edge and cannot be
changed.
This utility does not automatically recognize whether or not a
duplex printing unit is present in a printing system. Therefore,
there is a possibility that the duplex printing settings set here
may be invalid.
Specifies the printing resolution. The following resolutions are
Resolution
available: 300, 600, Fast 1200 and Fine 1200. The default
setting is 600.
KIR KIR (Kyocera Image Refinement) is a smoothing function that
enhances resolution, resulting in high-quality printing. The
default setting is disabled (not checked).
EcoPrint Enables the printing system to reduce the amount of toner
consumption to save printing costs. The default setting is
disabled (not checked).
KM-NET for Direct Printing