Denon DRA-F101 Operating Instructions Manual page 11

Number buttons
Press these buttons to recall
preset station.
Examples:
To call the station at preset
number 12:
Press ,
+10 2
To call the station at preset
number 29:
Press , ,
+10 +10 9
BAND button (BAND)
Use this button to select the
band.
FM AUTO FM MONO AM
PRESET button (PRESET)
Use these buttons to recall preset
stations on the tuner.
SLEEP button (SLEEP)
Press this button to set the sleep
timer
The buttons above for which there are no explanations cannot be operated with the DRA-F101.
Buttons not described here function in the same way as the corresponding buttons on the main unit.
2
Power standby button
(SYSTEM POWER STANDBY)
Press this to set the DRA-F101's
power to the standby mode.
(When connected in a system
with the D-F101 series, this
button sets the power of the
entire system to the standby
mode.)
D-F101 series
function operation block
When connected in a system
with the DCD-F101, these
buttons are used to operate the
DCD-F101.
For operating instructions, refer
to the manuals of the DCD-F101.
FUNCTION button
Press this to select the function
source to be played.
The function switches in the
following order each time the
button is pressed:
CD TUNER DVD/AUX
TAPE
MD TAPE PHONO
Remote control
function selector switch
Use this to select the function to
be operated with this remote
control unit. Set to TUNER to use
the DRA-F101's tuner function.
For instructions on operating the
various components, refer to their
respective manuals.
Power on button
(SYSTEM POWER ON)
When this button is pressed while the DRA-
F101's power is in the standby mode, the DRA-
F101's power turns on.
(When connected in a system with the D-F101
series, this button turns on the power of the
entire system.)
OFF ON
SYSTEM
POWER
PROG /
DIRECT
1 2 3 DIMMER button
CALL
4 5 6
The display becomes darker (in 4 steps) each
CLEAR
time this button is pressed.
7 8 9
Adjust the brightness of the display according to
RANDOM REPEAT
10 +10
the brightness of the room.
CD SRS
TIME EDIT
TAPE MD
TIME/
DIMMER
PANEL
RDS BAND TUNING
STOP PLAY VOLUME
/SELECT
VOLUME/SELECT buttons
PRESET
D
+ • Press to increase the volume,
it.
-
• These buttons are also used to set various
modes.
TAPE
SLEEP FUNCTION MODE
CD
TUNER
MD
The mode switches as follows each time the
button is pressed:
BASS
Playback
function source
RC-927
REMOTE CONTROL UNIT
Models compatible with system remote control
• Receiver : DRA-F101
• CD player : DCD-F101
Use these buttons to selecting
the station.
H to decrease
MODE button
TREBLE LOUDNESS
BALANCE
ENGLISH
TUNING button (•,ª)
11