Firewall Settings (For Network Users); Before Using The Konica Minolta Software; Windows ® Xp Sp2 - Konica Minolta bizhub 20 Software User's Manual

7

Firewall settings (For Network users)

Before using the KONICA MINOLTA software

Firewall settings on your PC may reject the necessary network connection for network printing, network
scanning and PC Fax. If you are using the Windows
CD/DVD-ROM, the necessary Firewall settings have already been made. If you did not install from the
CD/DVD-ROM follow the instructions below to configure your Windows Firewall. If you are using any other
personal Firewall software, see the User's Guide for your software or contact the software manufacturer.
UDP Port number information for Firewall configuration
UDP Port Network Scanning
External Port number
Internal Port number
1
Add Port number 137 if you still have trouble with your network connection after you added port 54925 and 54926. Port number 137 also supports
printing and Remote Setup over the network.
®
Windows XP SP2
a
Click the Start button, Control Panel, Network and Internet Connection and then Windows Firewall.
Make sure that Windows Firewall on the General tab is set to On.
b
Click the Advanced tab and Settings... button of Network Connection Settings.
c
Click the Add button.
d
Add port 54925 for network scanning by entering the information below:
1 In Description of service: Enter any description, for example "KONICA MINOLTA Scanner".
2 In Name or IP address (for example 192.168.0.12) of the computer hosting this service on your
network: Enter "Localhost".
®
Firewall and you installed Multi-Function Suite from the
Network PC-Fax
54925 54926
54925 54926
Network Scanning and
1
Network PC-Fax
137
137
7
7
7
7
119