Printing From Mac Os X; Registering The Printer - Canon 2160B002 User Manual

Printing from Mac OS X

Print from the application menu after registering the printer.
Important
•
We recommend exiting unnecessary applications before printing. Running several applications while
printing may interrupt the transfer of print data and affect printing quality.

Registering the printer

Before printing, you must register the printer in Printer Setup Utility (or Print Center ).
For instructions on registering the printer, see "Conguring the Printer Driver Destination (Macintosh)".
(→P.531)
Important
•
During this setup process, the printer will not be listed among available printers if it is off or disconnected.
•
By factory default, the AppleTalk protocol is disabled on the printer. You must enable the AppleTalk
protocol before using the printer in an AppleTalk network. For instructions on activating AppleTalk
protocol, see "Conguring the Destination for AppleTalk Network (Macintosh)". (→P.533)
Note
•
When registering the printer, choose USB if the printer is connected via USB, Canon FireWire(iPF) if
connected via IEEE 1394, or AppleTalk, Canon IP(iPF), or Bonjour if connected via a network.
•
For Canon IP(iPF) connections, enter the printer's IP address.
Printing from the application software
1.
In the application software, select Print from the File menu to display the dialog box for printing
conditions.
Note
•
This dialog box includes basic printing options and enables you to choose the printer, specify the
range of pages, number of copies, and so on.
2.
Select the printer in the Printer list.
Printing procedure
Basic Printing Workow 85