Replotting With Hp-Gl/2 Jobs Is Not Possible - Canon 2160B002 User Manual

HP-GL/2 problems

Replotting with HP-GL/2 jobs is not possible.

The data was lost because of replotting.
The printer stops when printing a HP-GL/2 job (the
carriage stops moving)
The printer is analyzing the print job.
622 Troubleshooting
Cause
Cause
Corrective Action
Data for replotting is lost after the following
operations. In this case, send the print job again.
•
The memory buffer was cleared from the Control
Panel.
•
The printer was turned off.
•
The printer has received a new HP-GL/2 print job.
•
Printing has been canceled
Corrective Action
Either wait a while for printing to resume, or on
the printer Control Panel, set Input Resolution to
300dpi.
(→P.48)