Under The Platen - Brother GT-782 Instruction Manual

2. Identifying Your Printer's Parts
２ -５ . Under the Platen
No. Name
1 Platen Height
Adjustment Lever
2 Platen Fixing Lever
3 Bush Platen Shaft
4 Platen Positioning Plate
<Note>
If you print on thick material all the time, you can lower the highest position of the Platen by 10 mm. Replace the Bush Platen
Shaft and Platen Positioning Plate to the ones of GT-541. Refer to "4-4-3. Lowering the Platen height"
9
Description
Adjusts the Platen height.
Leftmost "A" is the normal T-shirt position.
Check the exact height with Platen Button on Control Panel when you print on thicker
material.
Fixes the Platen.
Tighten/Loosen this lever to install/uninstall the Platen and to adjust the Platen height.
Fixes and holds the Platen.
GT-782
4327M