Unpacking Your Printer; Required Condition; Environment; Electrical Requirements - Brother GT-782 Instruction Manual

1. Read This First
１ -２ . Unpacking Your Printer
<Note>
Your printer must be unpacked by a Brother representative or a Brother authorized shipping company.
After unpacking, check that the following parts are included.
Contact Brother Customer Service Hot Line if any of these is missing.
GT-782 Printer
Install CD
AC cord, UL/CSA 13A
Nozzle Cleaning Kit
4 Print Heads for CMYK, 4 Print Heads W for White
2 Waste Ink Tanks
Basic Operation Manual
"How to uncrate" Manual
<Note>
Eight Filter Cartridges are installed in both Ink Cartridge Slots. Keep them since they should be used for maintenance &
transport operations.
１ -３ . Required Condition
Please use your printer under the conditions described in this section.

1-3-1. Environment

Keeping your printer
Operating your printer
For the best print result
If your room is dry, we recommend using a humidifier to avoid Print Heads from clogging with dried ink.

1-3-2. Electrical Requirements

Power:
Single-phase 100-230 V, 50/60 Hz
Power Consumptions:
0.8 A (average)
3
Temperature
20 % to 85 %
32 °F to 104 °F
(no condensation)
(0 °C to 40 °C)
50 °F to 95 °F
(10 °C to 35 °C)
64 °F to 86 °F 35 % to 85 %
(18 °C to 30 °C) (no condensation)
GT-782
Humidity