Brother GT-782 Instruction Manual page 117

Error
Message
code
4004 PC Data Error
4005 PC Data Error
4006 PC Data Error
4007 Blank Data
4008 PC Data Error
4009 PC Data Error
4011 DT:ILGL MNT SEQ
4020 PC Data Error
4021 PC Data Error
4022 PC Data Error
4100 Card Access Error
4101 Card Access Error
4102 Card Access Error
4103 Card Access Error
4104 Card Access Error
4105 Card Access Error
4106 Card Access Error
4107 Card Access Error
4108 Card Access Error
4109 No Files
4110 No Files
4200 Language Error
Meaning
GT-782 received the data that is not
supported from the PC.
GT-782 received blank print data from
the PC. This error unintentionally
occurs when the print data is simply
white design (object or image), and
when paper size of application is too
small and the design is out of range,
etc.
GT-782 received a print job that is
improperly large in data size.
GT-782 received a print job in which
commands are arranged improperly.
Maintenance sequence data error
The received update program file is not
for SH.
The received update program file is not
for BY.
The received update program file is not
for H8.
The file cannot be opened.
No file can be created.
The file cannot be closed.
Failure in file seeking
Failure in file reading
Failure in file writing
File error
File size error
Failure in file size acquisition
Failure in file search
No file is found.
Error in program of selected language
Reboot GT-782 and send print data again.
Contact your dealer or Brother .
These errors might happen when GT-782 malfunctions by
environmental reasons. If the error does not show, the printer is
available.
Check the print data with GT File Viewer.
Check the print range set in the application on the PC.
Check the "Print with Preview" screen in e.g. PhotoShop 7.0.
Reboot GT-782 and send print data again.
Contact your dealer or Brother .
These errors might happen when GT-782 malfunctions by
environmental reasons. If the error does not show, the printer is
available.
**
Reboot GT-782 and update firmware again.
Contact your dealer or Brother .
Check the contents in the Compact Flash.
Push OK Button to escape menu and re-enter Compact Flash.
Or see " 7-1. Solving Printer Problems".
**
Check the contents in the Compact Flash.
Push OK Button to escape menu and re-enter Compact Flash.
Or see " 7-1. Solving Printer Problems".
**
Check the contents in the Compact Flash.
Check the contents in the Compact Flash.
Check the contents in the Compact Flash. See " 7-1. Solving
Printer Problems".
Check the contents in the Compact Flash.
Move ARP files out of the folder to the root folder.
Update firmware again.
Contact your dealer or Brother .
GT-782
7. Troubleshooting
Solution
108