Night Mode; Audio Delay; Information; Status - Denon AVR-888 Owner's Manual

ENGLISH
g Night Mode
Optimized setting for late-night listening.
[Selectable items]
OFF
: Turn night mode off.
LOW
: Low setting.
MID
: Middle setting.
HIGH
: High setting.
Operating from the remote control unit
Press the NIGHT button.
The " " indicator lights when "LOW" , "MID" or "HIGH" is
selected.
OFF LOW
HIGH
h Audio Delay
Compensate for mismatched timing between video and audio.
Delay audio.
This sets the delay time for audio signals.
[Variable range] ~ 200 ms
0 ms
If you wish to adjust the "Audio Delay" while playing HDMI or
component video signals, press u to set "OSD" to "OFF" . This way
the audio delay can be adjusted while watching the picture. (Press u
again to switch to the on-screen display.)
This cannot be adjusted when playing in the EXT. IN, DIRECT or
STEREO mode (with "Front Speaker" set to "Large" , "Tone Defeat" to
"ON" and "Room EQ" to "OFF" .)


Information

Status

Shows information about current settings.
F Menu screen F
5.Information
1.Status

2.Audio Input Signal

3.HDMI Information
4.Auto Surround Mode
5.Quick Select
6.Preset Station
MID
a Main Zone
Shows information about settings for main zone.
The items displayed differ according to the input source.
[Items to be checked]
Select Source Name Surround Mode Input Mode
Rec Select Video Select Source Level Room EQ
Night Mode RESTORER
s ZONE2
Shows information about settings for multi-zone.
[Items to be checked]
Power Select Source
5-1.Status
[Items to be checked]
Select Source:
PHONO
Name :Record
Surround Mode:
STEREO
Input Mode :ANALOG
1/4
etc.
Volume Level
Audio Input Signal
Shows information about audio input signals.
F Menu screen F
5.Information
5-2.Audio Input Signal
1.Status
2.Audio Input Signal
Surround Mode:
3.HDMI Information
DOLBY DIGITAL EX
4.Auto Surround Mode
5.Quick Select
6.Preset Station
SIGNAL:Dolby Digital
fs :48kHz
Format:3/2/.1
Offset:-4dB
Surround Mode
: The currently set surround mode is displayed.
SIGNAL
: The input signal type is displayed.
fs
: The input signal's sampling
displayed.
Format
: The number of channels in the input signal (front,
surround, LFE) is displayed.
Offset
: The dialogue normalization correction value is
displayed.
Flag
: "MATRIX" is displayed if the input signal has
undergone matrix processing, "DISCRETE" if the
input signal has undergone discrete processing.
Dialogue normalization function
This is automatically activated when playing Dolby Digital sources.
This function automatically corrects the standard signal level for
individual program sources.
The correction value can be checked using the STATUS button on
the main unit.
The figure is the correction value when the standard level is
corrected.
frequency is