Connecting Equipment With Hdmi Connectors - Denon AVR-888 Owner's Manual

ENGLISH

Connecting Equipment with HDMI connectors

With HDMI connections, the video and audio signals can be transferred with a single cable.
DVD player Monitor
• By default, the HDMI audio signals are output from the speakers connected to the AVR-888.
• To output the sound from the TV, make the settings at menu "Manual Setup" – "HDMI Setup" – "HDMI
Audio Setup" – "TV" (vpage 27).

b The AVR-888 is equipped for HDMI version 1.3a. This version
is compatible with other versions, allowing connection to
all components equipped with an HDMI connector.
b The AVR-888 is compatible with 30- and 36-bit Deep
Color.
Compatible
Details
audio format (examples)
2-channel linear 2ch 32-192 kHz CD, DVD-Video,
PCM 16/20/24 bits DVD-Audio
Multi-channel 8ch 32-192 kHz
DVD-Audio
linear PCM 16/20/24 bits
Dolby Digital, DTS Bitstream DVD-Video
Copyright protection system (HDCP)
In order to play the digital video and audio signals of a DVD-
Video or DVD-Audio disc using HDMI/DVI connections, both
the connected DVD player and monitor must be equipped
for a copyright protection system called "HDCP" (High-
bandwidth Digital Content Protection).
HDCP is a copy protection technology consisting of data
encoding and mutual identification of the devices.
The AVR-888 is HDCP-compatible. For details on the DVD
player or monitor you are using, refer to its operating
instructions.
NOTE
• Use a CPPM-compatible DVD player to play DVD-Audio discs that are copyright-protected by CPPM.
• The AVR-888 cannot be controlled from another device via the HDMI cable.
• The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted
by the connected device.
• Video signals are not output properly when using devices that are not HDCP-compatible.
• Video signals are not output if the input video signals do not match the monitor's resolution. In this case,
switch the DVD player's resolution to a resolution with which the monitor is compatible.
• If the menu "Manual Setup" – "HDMI Setup" – "HDMI Audio Setup" setting (vpage 27) is set to
"AMP" , the sound may be interrupted when the monitor's power is turned off.
Discs
• Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI
connector. Normal playback may not be possible when using a cable other than one on which the HDMI
logo is indicated (a non-HDMI-certified product).
• If the monitor or DVD player does not support deep color, deep color signal transfer is not possible.
• If the monitor or DVD player does not support xvYCC, xvYCC signal transfer is not possible.
• When the AVR-888 and DVD player are connected using an HDMI cable, also connect the AVR-888 and
monitor using an HDMI cable.
• If the connected monitor or DVD player only has a DVI-D connector, use an HDMI/DVI converter cable.
When using a DVI cable, no audio signals are transmitted.
• Use a Deep Color compatible cable for connection to Deep Color compatible devices.
When connecting with an HDMI/DVI converter cable (adapter)
• HDMI video signals are theoretically compatible with the DVI format.
When connecting to a monitor, etc., equipped with a DVI-D connector, connection is possible using an
HDMI/DVI converter cable, but depending on the combination of components in some cases the video
signals will not be output.
• When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly
due to poor connections with the connected cable, etc.