Input Setup; Setting The Digital In Assignment; Setting The Ipod Assignment - Denon AVR-487 Operating Instructions Manual

ENGLISH
System Setup
1
1 3 T . T O N E Y e s <
2
T . T o n e A u t o >
3
T E S T T O N E O N
A U T O - F L
5
• To adjust the channel level separately for the different play modes
after setting the channel level, perform the operation on page 32.
¢ Adjusting the test tone using the remote control
unit
Adjustment of the test tones using the remote control unit is only
possible in the "Auto" mode and only valid in the STANDARD (Dolby /
DTS Surround) mode. The adjusted levels are automatically stored for
the different surround modes.
1
[TEST TONE]
Press .
• Test tones are output from the different speakers.
2 F F G G
Press to adjust the volume.
3
[TEST TONE]
Press .

Input Setup

Setting the Digital In Assignment

This assigns the different input sources for the digital input terminals.
1 F F G G
Press to select "2. In", then press
2 D D H H
Press to select the input terminals, then press
G G
to set.
CD, AUX, DVD, TV, VCR, V.AUX, CD-R:
Assign the different source according to the devices connected to
the AVR-487's input terminals.
3
ENTER H H
Press or to enter the setting and switch to
the iPod Assignment setting.
1
I n p u t S e t u p
2
1 C O A X 1 C D
2 C O A X 2 A U X
3
5 i P o d
• Digital input terminal assignment not possible for "TUNER".
• It is not possible to make the Digital In Assignment settings for the
function assigned at iPod Assignment mode.
19
ENGLISH

Setting the iPod Assignment

It is possible to assign the Control Dock for iPod's (ASD-1R, sold
separately) audio and video signals to any input terminals on the AVR-
487 and play them.
1 F F G G
Press to set.
ENTER
.
CD, AUX, CD-R:
F F
When using a Control Dock for iPod, it is possible to connect with
the audio input terminal of the assigned function.
DVD, TV, VCR, V.AUX:
When using a Control Dock for iPod, it is possible to connect with
the audio and video input terminals of the assigned function.
OFF:
This is the factory default setting.
2
ENTER
Press or
the EXT. IN Subwoofer Level setting.
1
5 i P o d
2
O F F
System Setup
H H
to enter the setting and switch to
C D
6 EXT.In SW +15