Playing Video And Audio Equipment; Basic Operation; Listening To Fm/Am Broadcasts - Denon AVR-1708 Owner's Manual

Turning Off the Sound Temporarily (Muting)
[MUTING]
Press .
To cancel, press [MUTING] again. Muting can also be canceled by
adjusting the master volume.
Listening with Headphones
<PHONES>
Plug the headphones into
The sound from the speakers and pre-out connectors is automatically
cut.
NOTE
Be careful not to set the volume too high when using headphones.
Switching the front speakers
<SPEAKER>
Press .
Video Select Function
Switch video input source while listening to audio signal.
VIDEO SELECT
Press until the desired picture appears.
b
To cancel, press VIDEO SELECT to select "SOURCE" .
Checking the currently playing program source, etc.
STATUS
Press
The current program source and various settings are indicated on
the display.
For details, refer to "Information" (vpage 34).
Switching the brightness of the display
[DIMMER]
Press
.

Playing Video and Audio Equipment

Basic Operation

1
Prepare the equipment.
q Load the DVD, CD or other software in the player.
(vSee the operating instructions of the respective devices.)
w To play a video device, switch the monitor input.
(vSee the monitor's operating instructions.)
2
SOURCE SELECT
Use
3
[MODE SELECTOR 1]
Set
(vpage 43 "Remote Control Unit Operations")
4
[MODE SELECTOR 2]
Set
to operate.
5
Start playback.
(vSee the operating instructions of the respective devices.)
.
.
Bright Dim
OFF Dark
to select the input source.
to "AUDIO" or "VIDEO".
to the component you want

Listening to FM/AM Broadcasts

Basic Operation
1
<SOURCE SELECT>
Either turn or press
select "TUNER".
2
[MODE SELECTOR 1]
Set to "AUDIO".
(vpage 43 "Remote Control Unit Operations")
3
BAND
Press to select "FM" or "AM".
4
Tune in the desired broadcast station.
q To tune in automatically (Auto Tuning)
Press [MODE] to light the "AUTO" indicator on the display, then use
TUNING to select the station you want to hear.
w To tune in manually (Manual Tuning)
Press [MODE] to turn off the display's "AUTO" indicator, then use
TUNING to select the station you want to hear.
• It is also possible to switch to "FM" or "AM" in step 1 by pressing
[TUNER].
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold TUNING to change
frequencies continuously.
ENGLISH
[TUNER]
to