Multi-Zone Operations; Turning The Power On And Off; Selecting The Input Source; Adjusting The Volume - Denon AVR-1708 Owner's Manual

ENGLISH
SOURCE SELECT
<ZONE2 ON/OFF>
<ZONE2 / REC SELECT>
[Front]
SOURCE
SELECT
VOLUME
[MUTING]
[MODE
SELECTOR 2]
[MODE
SELECTOR 1]
(Main remote control unit)
[ZONE2 OFF]
SOURCE SELECT
(Sub remote control unit)
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit


Multi-zone Operations

VOLUME

Turning the Power On and Off

GOperation on the main unitH
<ZONE2 ON/OFF>
Press
GOperation on the remote control unitH
[MODE SELECTOR 1]
Set
"ZONE2" (main remote control unit).
Press [ZONE2 ON]

Selecting the Input Source

[Rear]
[ZONE2 OFF]
GOperation on the main unitH
[ZONE2 ON] Press <ZONE2 / REC SELECT>
GOperation on the remote control unitH
SOURCE
[MODE SELECTOR 1]
Set
SELECT
"ZONE2" (main remote control unit).
[SOURCE SELECT]
Press

Adjusting the Volume

Set [MODE SELECTOR 1] to "AUDIO" and [MODE SELECTOR 2] to "ZONE2"
(main remote control unit).
Press [VOLUME].
[Variable range]
The ZONE2 volume can be adjusted only when "ZONE2" is selected
[ZONE2 ON]
at "System Setup" – "Option Setup" – "Amp Assign" (vpage 27).
VOLUME
[MUTING]
for the zone to be operated.
[MODE SELECTOR 2]
to "AUDIO" and
or [ZONE2 OFF] .
, then turn <SOURCE SELECT> .
[MODE SELECTOR 2]
to "AUDIO" and
.
– – – –70dB ~ –40dB ~ +18dB

Turning off the Sound Temporarily

[MODE SELECTOR 1]
Set to "AUDIO" and
"ZONE2" (main remote control unit).
[MUTING]
Press .
b To cancel, either adjust the volume or press
The setting is canceled when the zone's power is turned off.
to
The source selected for ZONE2 is also output from the recording
output connectors.
NOTE
Digital audio signals input from the COAXIAL or OPTICAL connectors
cannot be played in multi-zone.
to
[MODE SELECTOR 2]
to
[MUTING]
again.