Table of Contents
Advertisement
STORED NUMBERS
The "Stored Numbers" screen displays the
phone numbers currently stored in your
modem's memory.
Use this screen to edit or add numbers stored
in the modem's memory.
To store a number in your modem's memory,
simply click in one of the entry boxes. Type in
the phone number exactly as you would dial it.
Position Zero has a special feature. You can
set your modem to automatically dial this
U
M
S
SING
ODEM
TATION
number when your computer is turned on or
when it is reset. This is very useful if you are
using your modem with a "dumb terminal" or
know that you need to connect to a specific
bulletin board or listing service.
You can change stored numbers by highlighting
them and then typing the new numbers in their
place. Once you store your numbers, you can
dial them by entering a single command from
Terminal Mode:
(for example: ATDS0, ATDS1, or ATDS2).
Your U.S. Robotics modem comes with one
phone number already stored in Position 0. If
you haven't changed the default, typing
ATDS0 will automatically dial the 3Com BBS.
Once you enter the numbers you wish to store,
click Save to Modem to store them. Click
Exit to return to the Main menu.
49
Advertisement
Table of Contents
