Click Connection Control to bring up this
screen.
In the upper left hand corner of this screen,
you will find the current Connection Control
settings.
U
M
S
SING
ODEM
TATION
Use the "Connections Control" screen to
configure the following settings:
DATA TERMINAL READY (DTR)
ERROR CORRECTION
DATA COMPRESSION
CARRIER DETECT
For detailed information about these settings,
refer to the "Glossary" or the "Technical Quick
Reference" sections of this manual.
TIP:
a Data Terminal Ready signal from the
PC causes the TR light to light up.
Click Help for quick definitions of terminology
used in this screen.
On external modems, receiving
45