Settings Menu; Opening The Settings Menu Via The Supervisor Level - Miele PT 5136 OS Operating And Installation Instructions

Settings menu

Opening the Settings menu
If the Settings menu is not locked,
some of the settings may be
changed.
A The entry menu showing the current
time of day will appear after the dryer
has been switched on, until you
select a programme.
10:00
Select a programme
Settings F...
B Press the OK button.
C This will take you into the Settings
menu.
Selecting a setting
Back A
C
Language F
Supervisor level
D Use the + and – buttons to select the
setting you want, and confirm your
selection by pressing the OK button.
– The arrow H in the display indicates
that there are further options.
– If you do not make a selection in the
Settings menu and in its sub-menus
within approx. 15 seconds, the
display will revert to the previous
menu.
60
Closing the Settings menu
C
^ Select Back and confirm your
selection with the OK button.
Opening the Settings menu via
the Supervisor level
The Settings menu can be locked
against unauthorised use (except for
the Language option J). It will then
only be able to be accessed at
Supervisor level by entering a code.
C
^ Open the Supervisor level sub-menu
H
To enter the code
C
^ Confirm Access via code.
Enter the code 0 0 0 (factory default
setting). If you enter the code wrongly
three times, you will be locked out of
the Supervisor level for an hour.
Back A
Language F
Supervisor level
Back A
Language F
Supervisor level
Back A
Access via code
Change code
H